Model: STW-VP250 Brand: Stormwalker® Product: Warm lightweight and comfortable vest Overall structure: Warm and thermal storage flakes combined with waterproof and breathable fabrics. Material: Outer layer-polyester TPU coated fabric; Inner liner Stormwalker® high-efficiency thermal insulation flake. Description: 1. The outer layer is made of polyester brushed TPU coated fabric, which has good wear resistance and waterproof and breathable performance. 2.The inner Stormwalker® high-eficiency thermal insulation flake is prepared from special aerospace fibers, and its thermal insulation effect is better than that of high-end thermal insulation flake on the market. 3. Iregular quilting adds more fashion, the color matching design is stylish and beautiful, and the cuffs are tightened for more windproof. Color: Agate blue and grey Standard: EN13688:2013,GB/T 32614-2016
Clothing used for protection in these scenarios is typically tested according to the BS EN ISO 11612 standard. This standard categorizes fabrics into three performance levels, which align with the aforementioned levels (Level 1, 2, and 3). The tables prov ... Clik for More
The main difference between FR (flame-resistant) and non-FR clothing is their ability to resist flames and thermal hazards. FR clothing is designed to self-extinguish when exposed to flames, preventing or limiting burn injuries. On the other hand, non-FR ... Clik for More
FR safety refers to the use of flame-resistant (FR) clothing and equipment to protect workers from fire and thermal hazards in the workplace. Both European and American standards have specific requirements and standards for FR safety. ... Clik for More
The purpose of an arc flash study is to identify and evaluate the potential hazards associated with electrical arcs in a workplace, and to develop appropriate safety measures to protect workers from these hazards. The study is typically conducted by a qua ... Clik for More
An arc flash study is a comprehensive analysis of an electrical system to determine the potential hazards associated with electrical arcs and to establish appropriate safety procedures and personal protective equipment (PPE) requirements. An arc fl ... Clik for More
Once these factors are determined, the incident energy can be calculated using a variety of methods, including software programs, tables, and equations. The results of the incident energy calculation are then used to determine the appropriate level of PPE ... Clik for More
Incident energy is a measure of the thermal energy released during an arc flash event. It is the amount of energy per unit area that is generated by an electrical arc and is typically measured in calories per square centimeter (cal/cm2) or joules per squa ... Clik for More
Arc flash PPE (Personal Protective Equipment) levels and incident energy are both related to electrical safety in the workplace, but they refer to different asp ... Clik for More
Arc flash boundaries, on the other hand, refer to the distance from an arc flash hazard where a worker may be at risk of receiving a second-degree burn or worse if an arc flash incident were to occur. The arc flash boundary is established based on the pot ... Clik for More