Uang Energy Absorbing Lanyards

• This range of Lanyards is made from high quality Kernmantle Rope of dia 12mm and has C&G Energy Absorbing pack incorporated at the harness end of the Lanyard. 
• They are cross stitched and are protected with a strong transparent covering sleeve. This not only protects the ends, but also makes the stitches visible for easy inspection prior to use.
• The loops at the end are protected by an abrasion resistant thimble. This prevents the rope from being damaged by the metallic contact of the connector.

The rope also has a coloured tracer strand which loses its colour in due course of time, to show that the Lanyard is now unfit for further use. 

ENERGY ABSORBING KERNMANTLE ROPE LANYARDS

• Made up of Polyester Kernmantle of 12mm dia.
• The spliced end is protected with a strong transparent covering sleeve, which not onlyprotects the splicing but also makes the splicing visible for easy inspection before use.
• Loops at the end are protected by an abrasion resistant thimble, which prevents the ropefrom being damaged by the metallic contact of the connector.
• The rope also has a coloured tracer strand (age indicator) which loses its colour in duecourse of time, to show that the Lanyard is now unfit for further use.
• Available in length 1.0m, 1.5m, 1.8m, and 2.0m.
• All C&G Lanyards are also supplied with any other hook on special request.

• C&G offers a wide range of Webbing Lanyards made from high tenacity polyester yarn having different configurations of connectors on the ends.
• The Webbing Lanyards in this section are made up of 30 mm wide polyester webbing.
• The loops at the ends are protected by an abrasion resistant covering. This prevents the webbing from being damaged by the metallic contact of the connector.
• C&G offers a wide range of Webbing Lanyards, having different configurations of connectors on the ends.
• All C&G Lanyards are also supplied with any other hook on special request.

ENERGY ABSORBING 44MM WEBBING LANYARDS

• Made up of 44 mm and 30mm wide polyester webbing from high tenacity polyester yarn having a different configuration of connectors on the ends.
• The loops at the ends are protected by an abrasion resistant covering.  This prevents the webbing from being damaged by the metallic contact of the connector.
• Available in lengths 1.0m, 1.5m, 1.8m, and 2.0m.
• All C&G Lanyards are also supplied with any other hook on special request.

How does the Energy Absorber Work?

In the event of a fall the special webbing inside the Energy Absorber, opens up. This opening of the webbing takes up most of the jerk which is felt as an impact when a fall occurs. Hence finally very little jerk is felt on the body of the worker.

We can therefore imagine that if this Energy Absorber is absent from a fall protection system, the forces which are felt on the body of the worker can be very high and can result in injury.