Firefighting Covering

Model:	FGR-L/A
Material:	3 layers laminated aluminized fabric
Description:	Soft and comfortable; Light weight to carry, only 0.6KG and easy to don and doff; Special mirror reflective technic, suitable for proximity fire rescue under industrial radiant heat up to 900 ℃ for 15 minutes.
Application:	Proximity fire rescue; Searching after fire accident and do cutting operation; Fire extinguishing in narrow space like tunnel, underground tunnel, etc. Rescue in high temperature.
Standard:	EN11612:2015

Fabric Property	Value	Testing Method
Breaking Force(warp)	≥1050N	ISO 1421-1
Breaking Force(weft)	≥800N	ISO 1421-1
Tearing Force(warp)	≥20N	ISO 4674-2
Tearing Force( weft)	≥30N	ISO 4674-2
Flame retardation	Afterglow≤2s	ISO 15025
Flame retardation	Afterflame≤2s	ISO 15025

Emergency Evacuation Clothing, Proximity fire rescue, firefighting covering

Related Products

Aluminized jacket and pants 5H

Aluminized jacket and pants 4HV

Can withstand the degree of 1200°C;
Can resist thermal contact and hot melt metal splash;
The aluminized material is not easily peeled from the base material;
Steel and aluminum factory or other heat dangerous industrial environment.

Get in Touch

Interested in C&G's Services? Visit our Contact page and let us know!

Contact Now

Clothing used for protection in these scenarios is typically tested according to the BS EN ISO 11612 standard. This standard categorizes fabrics into three performance levels, which align with the aforementioned levels (Level 1, 2, and 3). The tables prov ... Clik for More

The main difference between FR (flame-resistant) and non-FR clothing is their ability to resist flames and thermal hazards. FR clothing is designed to self-extinguish when exposed to flames, preventing or limiting burn injuries. On the other hand, non-FR ... Clik for More

FR safety refers to the use of flame-resistant (FR) clothing and equipment to protect workers from fire and thermal hazards in the workplace. Both European and American standards have specific requirements and standards for FR safety. ... Clik for More

The purpose of an arc flash study is to identify and evaluate the potential hazards associated with electrical arcs in a workplace, and to develop appropriate safety measures to protect workers from these hazards. The study is typically conducted by a qua ... Clik for More

An arc flash study is a comprehensive analysis of an electrical system to determine the potential hazards associated with electrical arcs and to establish appropriate safety procedures and personal protective equipment (PPE) requirements. An arc fl ... Clik for More

Once these factors are determined, the incident energy can be calculated using a variety of methods, including software programs, tables, and equations. The results of the incident energy calculation are then used to determine the appropriate level of PPE ... Clik for More

Incident energy is a measure of the thermal energy released during an arc flash event. It is the amount of energy per unit area that is generated by an electrical arc and is typically measured in calories per square centimeter (cal/cm2) or joules per squa ... Clik for More

Arc flash PPE (Personal Protective Equipment) levels and incident energy are both related to electrical safety in the workplace, but they refer to different asp ... Clik for More

Arc flash boundaries, on the other hand, refer to the distance from an arc flash hazard where a worker may be at risk of receiving a second-degree burn or worse if an arc flash incident were to occur. The arc flash boundary is established based on the pot ... Clik for More