Goggles (autoclavable, reusable)

Design: Retro wide viewing angle, airtight anti-fog liquid splash and leakage, ventilation design, suitable for most corrective glasses, ultra-light weight, comfortable to wear for a long time without striae, can withstand high temperature sterilization in hospital 121 ℃ / 30min / Reusable 15 times, can maintain strong anti-fog after sterilization (KN grade)

Lens: Grade Polycarbonate-Impact Resistant, Strong Anti-Fog (KN Grade)

Cover body: High temperature TPR-Super comfortable, long-term wear without marks, high nose bridge seal, ventilation design, and block particles of 0.5 μm diameter, suitable for most corrective glasses

Headband: 24mm silicone-three-stage adjustable

Net weight: 101.8

Executive standard: CE: EN166: 2001; ANSI Z87.1: 2005

Medical goggles (autoclavable, reusable)

Related Products

Safety Glasses - Eyewear

Safety Goggles GB 10213 (EU) 2017/745 EN 455 EN420 EN ISO 3

Safety Goggles GB 10213 (EU) 2017/745 EN 455 EN420 EN ISO 374

Chemical protective apron with back wear CG300BA1

Material: Mircroporous film coated non-woven material 89g/m2±2
Model NO. CG300BA1
Color :Yellow
Size range: Free size
Packing :1pcs/Poly bag 60Poly bag /carton or other package

CG-JT1 Disposable Protective Clothing made with Dupont™ Tyv

Brand: C&G
Model: CG-JT1
Material: Dupont™ Tyvek® 1422A fabric
Product Name: CG-JT1 Disposable Protective Clothing
Sizes: S, M, L, XL, XXL, 3XL
Packaging: 60pcs /ctn, individually packaging

Biocool Disposable Cooling Vest

CG400BS Disposable Protective Clothing

Material: Non-woven microporous laminate film,
Standards: Type 4，Type 5，Type 6

Get in Touch

Interested in C&G's Services? Visit our Contact page and let us know!

Contact Now

Clothing used for protection in these scenarios is typically tested according to the BS EN ISO 11612 standard. This standard categorizes fabrics into three performance levels, which align with the aforementioned levels (Level 1, 2, and 3). The tables prov ... Clik for More

The main difference between FR (flame-resistant) and non-FR clothing is their ability to resist flames and thermal hazards. FR clothing is designed to self-extinguish when exposed to flames, preventing or limiting burn injuries. On the other hand, non-FR ... Clik for More

FR safety refers to the use of flame-resistant (FR) clothing and equipment to protect workers from fire and thermal hazards in the workplace. Both European and American standards have specific requirements and standards for FR safety. ... Clik for More

The purpose of an arc flash study is to identify and evaluate the potential hazards associated with electrical arcs in a workplace, and to develop appropriate safety measures to protect workers from these hazards. The study is typically conducted by a qua ... Clik for More

An arc flash study is a comprehensive analysis of an electrical system to determine the potential hazards associated with electrical arcs and to establish appropriate safety procedures and personal protective equipment (PPE) requirements. An arc fl ... Clik for More

Once these factors are determined, the incident energy can be calculated using a variety of methods, including software programs, tables, and equations. The results of the incident energy calculation are then used to determine the appropriate level of PPE ... Clik for More

Incident energy is a measure of the thermal energy released during an arc flash event. It is the amount of energy per unit area that is generated by an electrical arc and is typically measured in calories per square centimeter (cal/cm2) or joules per squa ... Clik for More

Arc flash PPE (Personal Protective Equipment) levels and incident energy are both related to electrical safety in the workplace, but they refer to different asp ... Clik for More

Arc flash boundaries, on the other hand, refer to the distance from an arc flash hazard where a worker may be at risk of receiving a second-degree burn or worse if an arc flash incident were to occur. The arc flash boundary is established based on the pot ... Clik for More