Acid and alkali resistant chemical protective clothing

Product:	C&G acid and alkali resistant chemical protective clothing
color	many colors are available
Construction:	1. 100%polyester
Feature:	Light weight, soft, More comfort
Application:	chemical industry
Color:	green , red , back and so on

C&G acid and alkali resistant chemical protective clothing

Size - Jacket & pant

EN Size Chart - Jacket (Unit: CM)
Size	Length	Chest	Shoulder	Sleeve
S	74	118	48. 5	61
M	76	123	50	62. 5
L	78	128	51. 5	64
XL	80	133	53	65. 5
XXL	82	138	54. 5	67
XXXL	84	143	56	68. 5

EN Size Chart - Pants (Unit: CM)
Size	Length	Waist	Hip
S	104	82	108
M	106	87	112
L	108	92	116
XL	110	97	120
XXL	112	102	124
XXXL	114	107	128

Related Products

AirFreTM-PAPR Hood head cover-M

Firefighter Chemical Protective Suit

Firefighter Chemical Protective Suit,The second-level chemical protective suit is a one-piece suit consisting of a chemical protective hood, a one-piece suit, anti-smash and anti-puncture chemical rubber boots, double protective wrists, detachable chemica

Chemical Protective apron CG300BA2

Material: Mircroporous film coated non-woven material 89g/m2±2
Model NO. CG300BA2
Color :Yellow
Size range: Free size
Packing :1pcs/Poly bag 60Poly bag /carton or other package

PP with PE Coated Non-Woven Isolation Gown with knitted cuff

Brand: C&G
Model: CG-500BA3
Color: Blue
Sizes: S, M, L, XL, XXL, 3XL
Standard: EN14235:2018
Material: PP+PE coated Non-woven fabric 45±2 g/㎡
Packaging: 80pcs /ctn, 1 Piece /poly bag

Get in Touch

Interested in C&G's Services? Visit our Contact page and let us know!

Contact Now

Clothing used for protection in these scenarios is typically tested according to the BS EN ISO 11612 standard. This standard categorizes fabrics into three performance levels, which align with the aforementioned levels (Level 1, 2, and 3). The tables prov ... Clik for More

The main difference between FR (flame-resistant) and non-FR clothing is their ability to resist flames and thermal hazards. FR clothing is designed to self-extinguish when exposed to flames, preventing or limiting burn injuries. On the other hand, non-FR ... Clik for More

FR safety refers to the use of flame-resistant (FR) clothing and equipment to protect workers from fire and thermal hazards in the workplace. Both European and American standards have specific requirements and standards for FR safety. ... Clik for More

The purpose of an arc flash study is to identify and evaluate the potential hazards associated with electrical arcs in a workplace, and to develop appropriate safety measures to protect workers from these hazards. The study is typically conducted by a qua ... Clik for More

An arc flash study is a comprehensive analysis of an electrical system to determine the potential hazards associated with electrical arcs and to establish appropriate safety procedures and personal protective equipment (PPE) requirements. An arc fl ... Clik for More

Once these factors are determined, the incident energy can be calculated using a variety of methods, including software programs, tables, and equations. The results of the incident energy calculation are then used to determine the appropriate level of PPE ... Clik for More

Incident energy is a measure of the thermal energy released during an arc flash event. It is the amount of energy per unit area that is generated by an electrical arc and is typically measured in calories per square centimeter (cal/cm2) or joules per squa ... Clik for More

Arc flash PPE (Personal Protective Equipment) levels and incident energy are both related to electrical safety in the workplace, but they refer to different asp ... Clik for More

Arc flash boundaries, on the other hand, refer to the distance from an arc flash hazard where a worker may be at risk of receiving a second-degree burn or worse if an arc flash incident were to occur. The arc flash boundary is established based on the pot ... Clik for More