How to repair a broken rubber glove？

In many operating environments, protective equipment is used to ensure the safety of workers.  Rubber gloves are generally used to protect the user's hands from injury.  However, sometimes the rubber gloves are slightly damaged due to careless handling.  If it is not used in some chemical hazardous products, it can be properly repaired to extend the service life of rubber gloves.  

So how do we repair damaged rubber gloves?  Cheng Ge editor sorts out the following experience .

First of all, you need to prepare the following materials:

Isopropyl alcohol (alcohol), cotton swabs and flexible waterproof rubber repair compounds (rubber adhesive)  

Repairing steps

1. Turn the damaged rubber gloves upside down first, and then find out the damaged position of the gloves in the bright place;  

2. Wipe the damaged part of the glove with alcohol, preferably wiping half an inch around the damaged part, and then waiting for 5 minutes for the alcohol to evaporate;  

3. Evenly and completely apply the rubber repair compound to the damaged part of the glove, and then wait for the adhesive to completely cure;  

4. Reverse the gloves and repeat the above steps to repair the damage on the other side;  

5, To blowing into the repaired rubber gloves, and then tighten the mouth of the bowl with your hands to retain air.  Then place the glove in water and let it soak for 30 secon