What are the common labor insurance products? How to use it

Safety production workers are inseparable from labor protection supplies, but what are the common labor protection supplies? How to use it? Below is a brief summary for you.

What are the labor insurance supplies?

Safety helmets, air respirators, eye and face supplies, overalls, safety shoes, safety belts, etc.

How to use labor insurance products

First, the correct use of helmets

1. Check whether the helmet is qualified in all aspects, whether it is damaged, whether it is within the specified period of use, whether it has a manufacturer, license, production date, etc.

2. Adjust the size of the buffer ring inside the helmet until the head feels slightly restrained. The vertical distance between the top of the person's head and the space in the cap body is not less than 32 mm to ensure sufficient buffer space on the head and also to facilitate ventilation.

3. The hard hat should be worn straight, and women need to put their hair in the hat.

4. The chin strap needs to be close to the chin, and the degree of tightness is suitable for the chin to be restrained but not uncomfortable. This prevents the hard hat from being blown off by high winds, knocked off by other objects, or falling off when the head is bobbing.

Second, the correct use of air respirators

1. Check whether the components of the air respirator are normal. Check the air tightness and air source pressure value of the air supply system of the air respirator; close the bypass valve and the air supply valve of the air supply valve, then turn on the bottle valve switch, put the full face mask on the head correctly and take a deep breath to supply The valve of the gas valve should be able to automatically open and supply gas; check whether the gas cylinder is firmly fixed.

2. Adjust the length of the air respirator adjustment belt according to the height, adjust the length of the belt according to the waist circumference, and buckle the belt. Adjust the pressure gauge to a position that is convenient for the wearer to observe.

3. Insert the quick connector, and connect the air supply valve and the full mask; for air respirators without quick connectors, hang the neck strap of the full mask around your neck.

4. Open the switch of the bottle valve for more than one circle, and listen to whether there is an alarm sound. If there is an alarm sound, it means that the bottle valve has been filled with compressed air after opening; the pointer of the pressure gauge should also indicate the corresponding pressure.

5. Wear a full face mask, take a deep breath, and observe the pressure gauge after the air supply valve supplies air. If there is a swing back, it means that the opening volume of the bottle valve switch is not enough, and you should open it again until the pressure gauge does not fall back.

3. Proper use of eye and face protective equipment

Only by choosing the appropriate eye and face protective equipment according to your own workplace can you achieve effective protection. Before use, you must read the instruction manual, especially the precautions in it. You should not take it for granted. You need to test the comfort, stability, and safety when wearing it.

Fourth, the correct wearing of work clothes

Choose the right work clothes according to your working environment, which can not only ensure the safety of life, but also improve work efficiency. The functions, fabrics, performance tests, etc. of the work clothes must meet the needs of one's own work, and one should not just focus on whether they meet the national standards, because the national standards are the most basic requirements.

5. Correct wearing of safety shoes

According to the needs of the workplace, choose the safety shoes that suit you. Wear general work shoes in general places; electrical insulation shoes for electrical work; waterproof work shoes for work in water pits. The shoelaces should be fastened, and the shoelaces should be tied tightly, and they should not be left too long and dragged on the ground.

6. Correct use of seat belts

1. According to the nature of the industry and the needs of the type of work, choose a seat belt that meets the specific scope of use.

2. Before use, check whether each component of the seat belt is normal, whether it is within the service life, and whether it has a certificate of conformity.

3. The seat belt should be hung high and used low, and it is strictly forbidden to hang low and use it high.

4. The seat belt must be hung on a firm and reliable place. It is not allowed to use knots, and it is not allowed to hang the hook directly on the safety rope. The hook must be hung on the connecting ring.