How to use anti-static gloves

When using anti-static gloves, you need to pay attention to the following key steps and precautions to ensure their effectiveness and safety:

1. Choose suitable anti-static gloves

Clear the application field: Different work fields have different requirements for gloves. Especially in the chemical field, because the reagents may be corrosive, anti-static gloves with anti-corrosion properties must be selected.

Material selection: High-quality anti-static gloves are usually automatically woven from slender nylon yarn, seamlessly woven, and coated with PU resin on the palm and finger surfaces. PU material has strong acid and alkali resistance, can effectively prevent slipping, and will not leave fingerprints, protecting the product surface.

2. Inspection before use

Check the integrity of the gloves: If the anti-static gloves need to have waterproof or anti-corrosion properties at the same time, the surface of the gloves must be carefully checked for damage before use. Any damaged gloves cannot be used to avoid accidents.

Clean hands: Before wearing gloves, clean your hands to avoid contaminants adhering to the gloves and affecting the anti-static effect.

3. Wear gloves correctly

Put them on gently: Gently put the gloves on your hands, making sure that the gloves completely wrap your fingers and palms, avoiding being too tight or too loose.

Check the sealing: Make sure that the contact between the gloves and the wrist is well sealed to prevent static electricity from leaking from the wrist.

4. Precautions during use

Avoid sharp objects: During use, try to avoid gloves from contacting sharp objects to avoid scratching the gloves.

Replace in time: If the gloves are found to be affected by pollutants such as sweat and grease, or the gloves are damaged or worn, they should be replaced with clean gloves in time.

5. Treatment after use

Wash and dry: Anti-static gloves need to be washed and dried after use. But be careful not to bake at high temperature to avoid damaging the glove material. If necessary, sprinkle talcum powder to prevent adhesion.

Regular inspection: For anti-static insulating gloves, the insulation of the gloves needs to be checked regularly to prevent accidents.

6. Storage and maintenance
Storage environment: Store anti-static gloves in a clean and clean place to avoid contamination by pollutants. At the same time, avoid direct sunlight and humid environment to ensure its stable performance.

Avoid mixing: Gloves of different materials and uses should be stored separately to avoid mixing and causing performance degradation or damage.

In summary, the correct use of anti-static gloves requires careful operation and attention in multiple links, including selection, inspection, wearing, use, handling and storage. Only in this way can the effectiveness and safety of anti-static gloves be ensured, providing strong protection for work.